rust removal Main Menu
rust remover Latest News
Limited Time Offer:
Concentrate SHOOTER- makes 1-gallon using your water.  Save on shipping and still 2x stronger than our competitor.

D-Rust-It RTU: We have stopped supplying RTU.  Why spend $ on shipping water?  We offer Industrial Concentrate Rust Remover to save on shipping and floor space, unlike the others. 

Read more ->
other rust removers not a good Featured Product
1-Gallon Concentrate SHOOTER
Makes 1-gallon of industrial strength solution, saves $$ on shipping costs.  2x as strong as our competitors.

Read more ->
Rust Converters
Severely rusted plate with RCx 427 Converter applied  D-Rust-It RCx 427 Converter:
  • Non-Hazardous Formulation
  • Safe and Easy to Use
  • Brush off loose rust and apply thin coating, let dry 24 hours
  • RCx 427 stabilizes and binds rust to prepare iron and steel surfaces for extended protection
  • Can be applied to horizontal, vertical and upside-down surfaces
  • Can be applied using cloth, bristle brush, foam brush, roller or sprayer
  • Use when typical rust removal chemicals are hard to use
  • Covers up to 200-350 sq.ft. per gallon
Rust Dissolver Industrial Concentrate Industrial Concentrate MSDS

D-Rust-It RCx 427 Converter Makes Rust Removal Easy and Safe by Substantially Reducing:
  • Grinding
  • Abrasives
  • Wire Wheels
  • Sand Blasting
  • Acids
  • Time Consuming Labor
  • Just remove loose rust flakes, etc.

Application:
  • Apply to dry and oil/grease contaminated surfaces at temperatures above 60 F for best results
  • If outdoors, protect from rain for 24 hours
  • RCx 427 can be applied with any paint applicators including brushes, foam pads, rollers, cloth, sponge or sprayers
  • It is best to use a stiff brush or rag wipe to penetrate rough surfaces.
  • The covered areas will start to darken soon after application and should be ready to finish in 12-15 hours, or until dry
  • Do not expose to rain or water for 24 hours
  • If the surface is not sufficiently smooth after drying, light sand is permissible and recoat any areas that the coating was penetrated to bare metal
  • Laboratory testing indicates that a light even coating is best
  • Wipe off any drips or puddled areas before drying to ensure even coating
  • Too much RCx 427 will produce a thick , soft finish that will not accept a finish coat well
  • It is not necessary to paint RCx 427

Technical Info:
  • Prevent freezing liquid
  • Solvent: water
  • Shelf Life: up to 6 months
  • Covers up to 200-350 sq.ft. per gallon
  • Health=2, Flammability=0, Reactivity=0